CAMM
Air Monitor Corporation
116-044-91.P65 (8/31/10)
CAMM - IO&M Manual
5.15 – ANALOG OUTPUT CONFIGURATION
SECTION 5 – OPERATION
Operator can select which process variable Analog Output 4 represents.
Process variables available for output are:
– Transmitter Differential Pressure
– Transmitter Flow
– Temperature
– Absolute Pressure
– Special Function
41
- Display Configuration
Analog Output Config.
- Transducer Span Selection
- Output 4 Selection
- Return to Main Menu
Output 4
NO OUTPUT
1 Only if Square Root is ON in
Process Configuration.
Analog Output Config.
Return to
MAIN MENU
Default selection shown.
Available selections:
NO OUTPUT
TRANSMITTER
TRANSMITTER D.P.1
TEMPERATURE
ABS. PRESSURE
SPECIAL FUNCTION
Operator Setup Main Menu
1. While in Main Menu, use
UP
or
DN
to scroll to:
Analog Output
Configuration
2. Press
ENT
to enter Analog Output Configuration menu. Display will indicate:
Output 4
Selection
3. Press
ENT
and display will indicate current setting of Analog Output #4 (NO OUTPUT, TRANSMITTER,
TRANSMITTER D.P., TEMPERATURE, ABS. PRESSURE, SPECIAL FUNCTION).
4. Use
UP
or
DN
to change setting. Once desired setting is displayed, press
ENT
. New setting will be stored in
memory and display will return to Analog Output Configuration menu as in Step 2.
Note: If user desires not to change the setting and return to Analog Output Configuration menu, press
ESC
.
Unit will remain programmed as it was originally.
5. To return to Main Menu, select Return to MAIN MENU in Analog Output Configuration menu and press
ENT
.
Summary of Contents for CAMM
Page 2: ......
