3.2 Client Mode Settings
¾
Alias Name
: Another name for WL-5460AP.
¾
Disable Wireless LAN Interface:
Check the box to disable the Wireless LAN Interface,
by so doing, you won’t be able to make wireless connection with this Access Point in
the network you are located. In other words, this device will not be visible by any
wireless station.
¾
Band:
You can choose one mode of the following you need.
~
2.4GHz (B): 802.11b supported rate only.
~
2.4GHz (G): 802.11g supported rate only.
~
2.4GHz (B+G): 802.11b supported rate and 802.11g supported rate.
The default is 2.4GHz (B+G) mode.
¾
SSID (Network ID):
The SSID differentiates one WLAN from another; therefore, all
access points and all devices attempting to connect to a specific WLAN must use the
same SSID. It is case-sensitive and must not exceed 32 characters. A device will not
be permitted to join the BSS unless it can provide the unique SSID. An SSID is also
referred to as a network name because essentially it is a name that identifies a
wireless network.
In this mode, the SSID is the available remote Access Point to connect to.
AirLive WL-5460AP v2 User Manual
26
