referred to as a network name because essentially it is a name that identifies a
wireless network.
In this mode, the SSID is the remote WISP CPE to connect to.
¾
Site Survey:
Site survey helps to find out available access point around. You can also
check to prevent using same SSID or channel with other AP.
¾
SSID of Extended Interface:
This field is the SSID of remote Access Point to connect
to.
¾
WAN Port:
Allow user to set the channel manually or automatically. If set channel
manually, just select the channel you want to specify. If
“Auto”
is selected, user can
set the channel range to have Wireless Access Point automatically survey and choose
the channel with best situation for communication. The number of channels supported
depends on the region of this Access Point. All stations communicating with the Access
Point must use the same channel.
¾
WAN Port:
WL-5460AP provides 4 methods for client to access the internet. This
depends on the location and the service which the ISP provides. You need to contact
the ISP for detail information.
AirLive WL-5460AP v2 User Manual
39
