manualshive.com logo in svg

Air Live WL-5460AP, User Manual

Share
Download
Air Live WL-5460AP User Manual Download Page 53

                                                                                                                                AirLive WL-5460AP v2 User Manual 

53 

t 

 this watch dog function.

 

etween 1 to 60 mins. 

ireless station to the other, it will waits 

r an Acknowledgement frame from the remote station. If the ACK is NOT received within 

select a level to make sure that the output power measured at the antenna end will no
exceed the legal limit in your country. 
 

Enable WatchDog:

 Check and enable

 

Watch Interval:

 Setup the interval time for watch dog function b

 

Watch Host:

 Enter the watch dog host ip address. 

 

Ack timeout:

 When a packet is sent out from one w

fo
that timeout period then the packet will be re-transmitted resulting in reduced throughput. If 
the ACK setting is too high then throughput will be lost due to waiting for the ACK Window 
to timeout on lost packets. By having the ability to adjust the ACK setting we can effectively 
optimize the throughput over long distance links. This is especially true for 802.11a and 
802.11g networks 
You can set as default for auto adjustment. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for WL-5460AP









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands