AirLive WL-5460AP v2 User Manual
52
ved it
pecify the packet size. The RTS
arning:
Enabling RTS Threshold will cause redundant network overhead that could
his value should remain at its default setting of 2347. Should you encounter inconsistent
eacon Interval:
Beacon Interval is the amount of time between beacon transmissions.
e
ata Rate:
By default, the unit adaptively selects the highest possible rate for transmission.
are
reamble Type:
A preamble is a signal used in wireless environment to synchronize the
k
roadcast SSID:
Select enabled to allow all the wireless stations to detect the SSID of this
PP:
IAPP (Inter Access Point Protocol) is designed for the enforcement of unique
ion’s
02.11g Protection:
The 802.11g standard includes a protection mechanism to ensure
wo
x Power Level:
For countries that impose limit on WLAN output power, it might be
necessary to reduce TX (transmit) power. There are 7 TX Power Levels to choose from —
transmission. It will also confirm the requestor station that the Access Point has reser
for the time-frame of the requested transmission.
If the “Hidden Node” problem is an issue, please s
mechanism will be activated if the data size exceeds the value you set..
The default value is 2347.
W
negatively affect the throughput performance instead of providing a remedy.
T
data flow, only minor modifications of this value are recommended.
B
Before a station enters power save mode, the station needs the beacon interval to know
when to wake up to receive the beacon (and learn whether there are buffered frames at th
access point).
D
Select the basic rates to be used among the following options: Auto, 1, 2, 5.5, 11or 54 Mbps.
For most networks the default setting is Auto which is the best choice. When Auto is
enabled the transmission rate will select the optimal rate. If obstacles or interference
present, the system will automatically fall back to a lower rate.
P
transmitting timing including Synchronization and Start frame delimiter. In a "noisy" networ
environment, the Preamble Type should be set to Long Preamble. The Short Preamble is
intended for applications where minimum overhead and maximum performance is desired.
If in a "noisy" network environment, the performance will be decreased.
B
Access Point.
IA
association throughout a ESS (Extended Service Set) and a secure exchange of stat
security context between current access point (AP) and new AP during handoff period.
8
mixed 802.11b and 802.11g operation. If there is no such kind of mechanism exists, the t
kinds of standards may mutually interfere and decrease network’s performance.
T
