manualshive.com logo in svg

Air Live WL-5460AP, User Manual

Share
Download
Air Live WL-5460AP User Manual Download Page 28

3.3 Bridge Mode Settings 

 

 

¾

 

Alias Name

: Another name for WL-5460AP. 

¾

 

Disable Wireless LAN Interface: 

Check the box to disable the Wireless LAN Interface, 

by so doing, you won’t be able to make wireless connection with this Access Point in 
the network you are located. In other words, this device will not be visible by any 
wireless station.   

¾

 

Band:

 You can choose one mode of the following you need.    

~

    2.4GHz (B): 802.11b supported rate only. 

~

    2.4GHz (G): 802.11g supported rate only.   

~

    2.4GHz (B+G): 802.11b supported rate and 802.11g supported rate. 

The default is 2.4GHz (B+G) mode. 

¾

 

Channel Number: 

Allow user to set the channel manually or automatically. If set 

channel manually, just select the channel you want to specify. If 

“Auto”

 is selected, 

user can set the channel range to have Wireless Access Point automatically survey 

AirLive WL-5460AP v2 User Manual 

28

 

Summary of Contents for WL-5460AP









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands