6. Put a new gasket on the oil level plug. When the oil begins to flow out of the oil level
plug hole. Insert and lighten the oil level plug.
7. Put a new gasket on the gear oil drain screw. Insert and tighten the gear oil drain screw.
Cleaning fuel tank
Gasoline is highly flammable, and its vapors are flammable and explosive.
⚫
If you have any question about properly doing this procedure, consult your dealer.
⚫
Keep away from sparks, cigarettes, flames, or other sources of ignition when
cleaning the fuel tank.
⚫
Remove the fuel tank from the boat before cleaning it. Work only outdoors in an area
with good ventilation.
⚫
Wipe up any spilled fuel immediately.
⚫
Reassemble the fuel tank carefully. Improper assembly can result in a fuel leak,
which could result in a fire or explosion hazard.
⚫
Dispose of old gasoline according to local regulations.
1. Empty the fuel tank into an approved container.
2. Pour a small amount of suitable solvent into the tank. Install the cap and shake the tank.
Drain the solvent completely.
3. Remove the screws holding the fuel joint assembly. Pull the assembly out of the tank.
Tightening torque:
9 Nm (0.92 kgf-m, 6.6 ft-lb)
Tightening fuel tank:
9 Nm (0.92 kgf-m, 6.6 ft-lb)