16
(3-1) Sleep
To conserve battery life, the
AUET
is
equipped with a
SLEEP
mode. If a
selected amount of time, from
OFF
to
20
minutes, has passed without any activity,
the
AUET
will go into a standby condition.
Setting the Sleep Timer
1. From the main display press
MENU.
2. Use the
Selection Arrow
buttons to
select
SYSTEM MENU.
3. Press the
Right Selection
button to
select (
SEL
)
SYSTEM MENU.
4. Use the
Left and Right Selection
buttons to adjust the
SLEEP
timer. If
OFF
is selected, the
AUET
will remain
on until manually powered
OFF
.
5. When the desired time is set, press
ENTER
to set and return to the
System Menu
screen.
(3-2) Lockout Menu
The
LOCKOUT MENU
provides various
levels of protection against unauthorized
or accidental adjustment of basic settings
to the
AUET
. By turning the
LOCKOUT
MODE ON
or
OFF
for various functions,
the user can
allow
or
prevent
adjustment
to these functions.
The functions that can be locked out are:
Mode (3-2-1)
- Measurement mode
of Peak, 1
st
Peak, Pulse or Track
Units (3-2-2)
- Engineering units of
FtLb, InLb, InOz, KgFM, KgFCm,
GFCm, CNm, Nm
Scroll (3-2-3)
- Prevents using the
Selection Arrow buttons to scroll in
order to enable MEMORY MODE or
scroll through stored rundown values
Setting Lockout Modes
1. From the main display press
MENU.
2. Use the
Selection Arrow
buttons to
scroll to
SYSTEM MENU.
3. Press the
Right Selection
button to
select
(SEL) SYSTEM MENU.
4. Use the
Selection Arrow
buttons to
scroll to
LOCKOUT MENU.
5. Press the
Right Selection
button to
select
(SEL) LOCKOUT MENU.
6. The user can then use the
SELECTION
ARROW
buttons to scroll through the
following options in the order shown:
7. Use the
Left
and
Right Selection
buttons to turn each lockout mode
ON
or
OFF
separately.
8. Once all
LOCKOUT MODES
are set
properly, press
ENTER
to return to
the
SYSTEM MENU.
At any
Menu
level, pressing
ENT
twice
will return to the Main Display Screen at
the previously set
Operating Mode.
(3-3) Contrast
1. From the main display press
MENU.
2. Use the
Selection Arrow
buttons to
scroll to
SYSTEM MENU.
3. Press the
Right Selection
button to
select
(SEL) SYSTEM MENU.
4. Use the
Selection Arrow
buttons to
scroll to
CONTRAST.
5. Press the
Right Selection
button to
select
(SEL) CONTRAST.
6. Use the
Left and Right Selection
buttons to adjust the
CONTRAST
of
the screen LCD display.
At any
Menu
level, pressing
ENT
twice will
return to the Main Display Screen at the
previously set
Operating Mode.
(3-4) Information
Important information regarding the
AUET
and the internal transducer can be viewed
in the
INFORMATION
section of the
SYSTEM MENU
. This information may be
valuable
when
contacting
AIMCO
customer service or technical support.
Accessing the Information Screens
1. From the main display press
MENU.
2. Use the
Selection Arrow
buttons to
scroll to
SYSTEM MENU.
3. Press the
Right Selection
button to
select
(SEL) SYSTEM MENU.
