AHRI OM 210, Operation Manual

Page: 15 / 82

USE OM - JANUARY 2017
7
3.6
System Manufacturer’s Required Equipment Provisions
. The System Manufacturer shall provide
a complete system, consisting of the following:

Outdoor Unit;

Indoor coil;

Expansion device;

Air-moving equipment (if required);

Other listed system enhancement devices; and

Published installation instructions.
The Participant shall be responsible for shipping all necessary equipment and parts to the Laboratory in
order to ensure that the sample functions properly and test(s) can be performed in accordance with the
Standard.
3.7
ICM
’s Required Equipment Provisions
. The ICM manufacturer shall provide the following:

Indoor coil;

Expansion device;

Air-moving equipment (if required);

Other listed system enhancement devices;

Published installation instructions.
The Participant is responsible for shipping all necessary equipment and parts to the Laboratory in order to
ensure that the sample functions properly and test(s) can be performed in accordance with the Standard.
3.8 Break-in Operation of Test Units. A Participant, at its expense, shall have the Laboratory operate
the equipment for a specified time prior to testing. The break-in request should be listed in the comments
section of the Directory.
3.9
Certified Data . In accordance with the Standard, the following certified ratings are verified by test:
3.9.1 Unitary Small Air-Conditioners (Systems and Mixed-Match Coils), Air-Cooled under
65,000 Btu/h [19,033 W] .

Standard Rating Cooling Capacity, Btu/h [W];

Energy Efficiency Ratio (EER), Btu/(W·h); and

Seasonal Energy Efficiency Ratio (SEER), Btu/(W·h).
3.9.2 Unitary Small Air-Conditioners (Systems and Mixed-Match Coils), Water-Cooled and
Evaporatively Cooled under 65,000 Btu/h [19,033 W] .

Standard Rating Cooling Capacity, Btu/h [W]

Energy Efficiency Ratio (EER), Btu/(W·h)

Integrated Energy Efficiency Ratio (IEER), Btu/(W

h)
3.9.3 Unitary Small Air-Source Heat Pumps (Systems and Mixed-Match Coils), Air-Cooled
under 65,000 Btu/h [19,033 W] .

Standard Rating Cooling Capacity, Btu/h [W]

Energy Efficiency Ratio (EER), Btu/(W·h)

Seasonal Energy Efficiency Ratio (SEER), Btu/(W·h)

High Temperature Heating Standard Rating Capacity, Btu/h [W]

Region IV Heating Seasonal Performance Factor (HSPF) Minimum Design
Heating Requirement, Btu/(W·h)