8 Settings
- 77
–
the field next to Radio network registration. However, the sensor is
not in energy saving mode when the green LED is lit respectively is
flashing when the batteries are being charged. The blue LED of the
wireless sensor is lit, respectively is flashing when data is being
transferred to the data logger.
!
The operating mode “Measure” or “... with network monitoring” must
be set in the data logger.
Wireless sensors for which the energy saving mode was interrupted
because the operating mode “Configuration” was set, will
automatically re-enter the energy saving mode as soon as one of the
operating modes “Measure” or “...with network monitoring” is set.
For wireless sensors whose energy saving mode was interrupted by
pressing the ON/OFF key:
→
Shortly press the ON/OFF key
14
of the wireless sensor.
➢
The LEDs will show the battery charge level of the wireless sensor for
8 seconds (see chapter 7.1.2 How to check the Battery Charge Level).
➢
The LEDs of the wireless sensor are no longer lit (provided that the
wireless sensor does not transfer data to the data logger). The blue
LED is flashing once every 10 seconds. The green LED is flashing
simultaneously with the blue LED in case the battery of the wireless
sensor is being charged.
Or
→
Shortly press the
F
key
15
of the wireless sensor.
➢
The LEDs of the wireless sensor are no longer lit (provided that the
wireless sensor does not transfer data to the data logger). The blue
LED is flashing once every 10 seconds. The green LED is flashing
simultaneously with the blue LED in case the battery of the wireless
sensor is being charged. The green and the blue LED are flashing
once every minute while the wireless sensor is querying data
(intended for this very sensor) from the data logger.
Disable sleep mode
The wireless sensor is in sleep mode when in the menu
Sensor>Power settings the text
Power saving
is being displayed
in the field next to Radio network registration
