7 Usage
- 51
–
8. Enter the baud rate set in the data logger. You can find the set baud
rate in the data logger menu Settings>Device
settings>Communication.
9. Click on the field next to
Protocol.
10. Click on
ALMEMO 470.
11. Click on
OK.
Connection via Ethernet network
3. Click on
Interface.
4. Click on the tab
IP network.
5. Look for the IP address of the data logger in the data logger menu
Settings>Device settings>Communication.
6. Enter the IP address in the field next to
IP address or host
.
7. Click on the field next to
Port.
8. Enter
10001
.
9. Click on the field next to
Protocol.
10. Click on
ALMEMO 470.
11. Click on
OK.
➢
If connected to the ALMEMO
®
Control software,
Active
will be
displayed in the data logger menu Settings>Device
settings>Communication in the line PC software connection.
