7 Usage
- 38
–
➢
Measurement data received from the wireless sensor will be saved to
the data logger with a timestamp.
➢
In the upper line of the display
1
the arrows of the icon
will start
flashing.
In case the data storage mode ring memory is enabled,
the arrows flash in
orange
.
In case the data storage mode linear memory is enabled,
the arrows flash in
blue
.
As long as a measuring operation is running, some settings and
operations cannot be performed on the data logger. For example, no
sensors can be paired or unpaired.
You will also find the button
Start
in the menu sensor overview
.
Stop a measuring operation
1. In the home screen, tap on Display
.
2. Open the menu measuring point list, user menu, or measured value
display.
3. Tap on the button
Stop.
➢
The START LED
3
goes out.
➢
In the upper line of the display
1
the arrows of the icon
do no
longer flash.
You will also find the button
Stop
in the menu sensor overview
.
7.3.2 How to recognize and manage Alarm Signals
If an alarm is triggered in the data logger, a dialog field will open to
inform you about the alarm. The alarm will be listed in the alarm list
featuring the following information: Alarm occurrence time, time of
alarm end, and the corresponding measuring channel. In addition, an
acoustic signal will sound (provided that the signal transmitter has
been switched on) and the ALARM LED
5
will light up.
If an alarm is triggered in the data logger, a dialog field will open to
inform you about the alarm. The alarm will be listed in the alarm list
