Ahlborn ALMEMO 1036-2 Operating Instructions Manual Download Page 38

Page: 38 / 44

19. Declaration of conformity

19. DECLARATION OF CONFORMITY

Ahlborn Mess- und Regelungstechnik GmbH declares herewith that the

ALMEMO

1036-2 device carries the CE label and complies in full with the re-

quirements of EU directives relating to low voltage and to electromagnetic

compatibility (EMC) (89/336/EWG).
The device is designed specifically for use in laboratories or test and measure-

ment areas in a controlled electromagnetic environment.
The following standards have been applied in evaluating this product.

Safety

EN 61010-1: 2001

EMC:

EN 61326: 2013

If a product is modified in any manner not agreed with us in advance, this declaration
becomes void.

20. ANNEX

20.1 Technical data

Measuring inputs

2 ALMEMO

sockets, for

Pt100 psychrometer FPA836-3P3,

D6 precision humidity/temperature Sensor FHAD36-Rx,
D6 Ntc psychrometer FNAD36-3

Measuring channels

12 maximum

Galv. separation

Solid state relays (50V)

Measuring range

Pt100, -200 to +400 °C

Resolution

0.001K

Measuring current

1 mA

A/D converter

Delta - sigma 24 bit, 1.25 mops, amplification 5

Accuracy

±0.01 K ±1 digit (at 50 °C to 400 °C)

Nominal conditions

23°C ± 2K, 1013mbar,
Battery operation without display illumination

Temperature drift

2 ppm / K

Atm. pressure sensor

integrated in the device

Measuring range

300 to 1100 mbar

Accuracy

±2.5 mbar (700 to 1100 mbar, 0 to +65 °C)

Humidity variables

Measuring ranges, calculated

Rel. atmospheric humidity

RH, Uw 0.00 to 100.00 %H

Dew-point temperature

DT, td -64.80 to +100.00 °C

Mixture MH, r

0.0 to 6500.0 g/kg

Absolute humidity AH, dv

0.0 to 596.3 g/m3

Vapor pressure VP, e

300 to 1100.0 mbar

Enthalpy En, h

0.0 to 6500.0 kJ/kg

Outputs

1 ALMEMO

socket for data cable

38 ALMEMO

1036

Summary of Contents for ALMEMO 1036-2













































Search results

Summary of Contents for ALMEMO 1036-2

Reviews:

Related manuals for ALMEMO 1036-2

Brands by name

Popular brands

Ahlborn ALMEMO 1036-2, Operating Instructions Manual

Search results

Summary of Contents for ALMEMO 1036-2

Reviews:

Related manuals for ALMEMO 1036-2

Brands by name

Popular brands