Ahlborn ALMEMO 1036-2 Operating Instructions Manual Download Page 16

Page: 16 / 44

8. Connecting sensors / transducers

2. Ensure that the humidity sensor is always sufficiently moistened. If you are

unsure whether there is sufficient moisture carry out a visual inspection of

both the cotton sheath and the wick itself. To moisten the wick use distilled

water only. Ordinary water may leave calcified deposits on the wick.

3. If the wick no longer absorbs water properly (through dirt or dryness), re-

place its cotton sheath.

4. Air velocity at the air intake must be minimum 2 m/s. Ensure therefore that

the air intake is always free and unobstructed.

5. Avoid inadvertently warming the probe head from external heat sources or

your own body heat.

8.3 Measuring sockets, measuring channels

Measuring instrument ALMEMO

1036 has 2 measuring sockets M0 and M1

(1) and to each of these up to 4 measuring channels can be allocated.

Device-internal channels

This device also provides 4 device-internal additional channels. These can be

used, as and when necessary, to program the battery voltage, the device-inter-

nal atmospheric pressure, or a function channel Differential . see 14.3, 11.3.

Channel assignment

on the 1036-2:

The 3 possible sensors are programmed on leaving

our factory with the following ranges (s. 14.3):

Pt100-Psychrometer

FPA836-3P3

Psychrometer

FNAD46-3

Humidty sensor

FHAD36-Rx

D r

D AP

P2td

D Uw

D td

P2Uw

D tw

D Uw

1. P314 HT P314 TT AP

D t

M2 M0/M1

M0/M1

16 ALMEMO

1036

1. chan.

2. chan.

3. chan.

4. chan.

sensor channels

1036-2

M0 M1 M2

internal

channels

Summary of Contents for ALMEMO 1036-2













































Search results

Summary of Contents for ALMEMO 1036-2

Reviews:

Related manuals for ALMEMO 1036-2

Brands by name

Popular brands

Ahlborn ALMEMO 1036-2, Operating Instructions Manual

Search results

Summary of Contents for ALMEMO 1036-2

Reviews:

Related manuals for ALMEMO 1036-2

Brands by name

Popular brands