9. Display and keypad
Help is provided by the softkey symbol <F> (for function selection)
<F>
To move forward to the next function press
▲
or
▼
...
Depending on function the keys
F1
,
F2
,
and
◄
,
►
are assigned the desired meaning,
e.g.. set measured value to zero.
<ZERO>
To delete the maximum / minimum value
<CLR>
To clear the memory
<CMEM>
To cancel the function
<ESC>
9.5 Entering data
When a programmable parameter is selected its current value can be cleared
or reprogrammed directly. (see 9.4)
To
delete a programmed value
press
< CLR >
To program a value press
PROG
You should now be in
programming mode
.
<P>
should appear in the
middle of the softkey bar.
The cursor appears below the first input position flashing
Smoothing 05
To
increment
the selected digit press
▲
...
To
decrement
the selected digit press
▼
...
To
change the arithmetic sign
of a numeric value press
< +/- >
To move forward to the
next position
press
►
The cursor now appears below the second position flashing.
Smoothing 05
To move
back to the previous position
press
◄
Each position
is programmed just like the first.
▲
/
▼
...,
►
To
save and exit
press
PROG
To
cancel
without saving press
<ESC>
When entering a series of
alphanumeric characters
select the appropriate
group.
For upper-case characters press
<ABC>
For lower-case characters press
< abc >
For numbers only press
< 123 >
For arithmetic sign press
< + - >
When entering certain parameters (e.g. units, baud rate, etc.) this procedure
can be used to select and program not just characters but whole designations.
20 ALMEMO
®
1036
