Measuring operation
For each measuring operation the maximum value and minimum value are ac-
quired and saved to memory. These values can then be displayed, printed out,
or deleted from memory.
Measured value memory
Up to 100 measured values can be saved manually. This data can then be
shown on the display or output via the interface.
Operation
All measured values and function values can be displayed in different menus
on the dot-matrix LCD screen. Seven keys (four of them softkeys) are avail-
able for operating the device. In this way the device and sensors can be pro -
grammed.
Output
All data logs, menu functions, saved measured values, and stored program pa-
rameters can be output to any peripheral equipment. Using the appropriate in-
terface cable any of interfaces RS232, RS422, USB, or Ethernet can be used.
Measured data can be output in list, column, or table format. Files in table for-
mat can be processed directly using any standard spreadsheet software. The
print header can be programmed to refer specifically to your company or to a
specific application.
Data logger
The device can, by fitting an external memory connector with a micro-SD mem-
ory card, be upgraded to a high-capacity data logger. Using this external mem-
ory connector (available as an accessory) files can be read out very quickly via
any standard card reader. As soon as this is connected two additional menus
with all the necessary parameters e.g. date, time-of-day, cycle, start time, end
time, memory capacity, file name etc. are available.
ALMEMO
®
1036
11
