6. Putting into service
6. PUTTING INTO SERVICE
Sensor connection
Connect sensors to sockets
M0
and
M1
(1) see 8.
Power supply
Via battery or mains adapter connected at socket
DC
(5)
see 7.1, 7.2
To switch ON
Press once and release key
ON / PROG
(7) see 7.4
Automatic display of the measuring menu see 11,
To call up the menu selection screen press
<MENU>
To activate / deactivate display illumination press
< ON>
To access the
Sensor display
s. 9.1
press
<F>
:
▲
/
▼
...
call up the menu press:
►
or
PROG
select a measuring channel
(s.11.1)
<M>
:
▲
/
▼
...
The measured values from
the sensor are displayed.
To call up the
functions menu
press
< FCT >
or select it in the
menu
selection screen
Max-Min, Memory
:
▲
/
▼
... ,
►
select a measuring channel
(s.11.1)
<M>
:
▲
/
▼
...
set a measured value to zero
PROG
,
<ZERO>
save a measured value (
s. 13.3)
< MEM>
To
display saved values
< LISTM>
To output memory via an interface to a printer or computer
Connect peripheral equipment via data cable to socket A1 (2). s. 16.3
To output memory see 13.3
< PRINT>
or command ´
P-04
´ from computer
12 ALMEMO
®
1036
