INSTRUCTIONS FOR USE
AGP 300 – 600 PRO
Rev.02/2019
40
When washing the packaging, the lid of the reservoir must be closed because the rinsing nozzle of
the strainer, mounted at the bottom of the cleaner, is also active when the liquid supply to the
packaging cleaner is opened.
Figure 9.2
9.3
Suction basket
The suction basket is designed to pump water from ponds, streams and wells into the main
reservoir through the filter, the pump and the regulator. It consists of a suction basket, 5 meters of
suction hose and an end fitting. The end fitting is mounted on the hose, which is then mounted on
the filter. Stretch the suction hose and submerge the suction basket in the water. Please note that
the suction height (the height difference between the water surface and the pump) significantly
affects the load on the membranes of the pump. The height difference between the pump and the
surface of the water should not exceed 3 m. Before activating the pump, turn the three-way valve
(17 – Figure 8.1) to direct the water into the main reservoir. Make sure that the other valves are
closed. The water current travels from the suction basket (19 – Figure 8.1) and through the suction
filter (18 – Figure 8.1), the pump (3 – Figure 8.1), regulating valves (14 – Figure 8.1), the three-
way valve (17 – Figure 8.1) into the reservoir (1 – Figure 8.1).
WARNING: Use safety gloves when handling plant protection products!
