INSTRUCTIONS FOR USE
AGP 300 – 600 PRO
Rev.02/2019
62
15.1
CHARACTERIZATION
The spraying appliances are characterised as follows:
For example: AGP 500 PRO; PR8ECF/2EMV; APS 121; 1070/14/2
•
AGP ....... abbreviation for spraying appliances
•
500 ....... nominal capacity of the reservoir
•
PRO ........ version, type
•
PR8F/2EMV ..... Regulator type (PR8) with a high-pressure cleaning filter (F) and two (2)
diverter valves (EMV)
•
APS 121 .... Pump type
•
1070/14/2 …. blower type, height (1070), number of nozzles (14), number of sections (2)
All other technical data for individual components (pumps, flow regulators etc.) can be found in
individual chapters. Technical data for nozzles with the tables and examples of consumption
calculations are given in the following pages.
15.2
SPRAYER DISPOSAL
Once the spraying appliance cannot be used anymore, you will have to clean it completely, take
it apart and sort the individual components of the sprayer by material. The components must be
handed over to an organisation which deals with waste materials. The reservoir and other plastic
parts of the sprayer can be recycled or burned in special incineration sites. The metal parts can be
sorted out as scrap metal. Consider the local legislation for waste materials.
15.3
MATERIALS AND RECYCLING
RESERVOIR…..PEHD (high density polyethylene)
FLEXIBLE HOSES…..RUBBER, PVC
FRAME…..STEEL
VALVES ….. more or less PA with fibre glass
PRESSURE REGULATOR …. brass and electrical components
NOZZLE HOLDERS ….. brass, rubber, PA
NOZZLE HOLDER HOSES…..PE (polyethylene)
