INSTRUCTIONS FOR USE
AGP 300 – 600 PRO
Rev.02/2019
55
After cleaning the sprayer with a detergent, fill at least 1/5 of the tank with clean water and repeat
the cleaning process. Make sure that you have cleaned all elements that have come in contact with
the insecticide or the detergent.
Make sure that you have precisely cleaned all filters. Be careful not to damage the fabric on the
filter insert while cleaning filters. If the filter insert is damaged, replace it with a new one. (A more
precise description about cleaning of the pressure filter can be found in the chapter 7.6.1).
At the end of the cleaning process, clean all nozzles. Nozzles can be cleaned only by means of a
soft brush, compressed air or water. You can damage the nozzle when cleaning it with a hard item.
Before using aggressive chemical agents, it is recommended to protect the machine with a silicone
spray or paraffin oil. After use, clean the machine thoroughly and re-apply silicone spray or
paraffin oil.
WARNING: In the case your spraying equipment is being cleaned by a high-
pressure cleaning appliance, it is recommended to grease all moving parts
after every single cleaning !
WARNING: If aggressive chemical agents are used, they may chemically
react with the zinc-plated parts of the mist blower, leading to corrosion of
zinc-plated parts.
