INSTRUCTIONS FOR USE
AGP 300 – 600 PRO
Rev.02/2019
15
2.15
Safe maintenance
•
Before starting to operate the machine learn how to maintain it.
•
Keep the working place clean and dry.
•
Do not grease, maintain or adjust the machine while it is moving! Do not touch moving parts
of the machine! Turn off the machine and make sure that there is no working pressure in the
circulation of the chemicals!
•
Do not maintain or service the machine before it is thoroughly cleaned.
•
During maintenance and servicing of the machine, remove the start key or disconnect the
connections.
•
Disconnect the drive shaft of the tractor (PTO) to prevent sudden actuation and operation of
the machine.
•
Do not inspect the machine without "turning on" safety elements.
•
Do not perform reparatory welding on the machine, if you have used ammonium nitrate or
any other liquid that contains ammonium nitrate for spraying without having thoroughly
cleaned the machine before.
•
Do not enter the reservoir to repair or clean it.
•
Support and safely mount all parts that need to be lifted during maintenance.
•
Keep all of the sprayer’s parts in good condition. Repair damages immediately. Replace
worn and damaged parts. Remove excess oil, grease or any other debris.
•
Disconnect the battery before you start to adjust the electrical system or perform welding on
the machine.
•
During maintenance of the machine or cleaning the nozzles use appropriate protection
equipment in accordance with the regulations.
•
It is strictly forbidden to release chemicals into the environment.
2.16
Road transport
Do not drive the machine on public roads. If you have to, you must consider the following
instructions:
•
Sprayer, connected to the tractor, can only be transported on the road, when the reservoir
contains no chemical products.
•
Connect the sprayer to the tractor only if the load on the wheels does not exceed the set
maximum weight. After connecting the machine, at least 20 % of the tractor's weight must
be on driven wheels. You can achieve these values by adding weights at the front and
removing weights at the back of the tractor. You can decide on this on the basis of weighing
before first operation.
•
Sprayer can completely or partially cover the lights and signs on the tractor. In such case,
the machine must be fitted with light signals and warnings.
•
During road transport of sprayer with the tractor, follow traffic regulations.
•
Observe the local traffic code when driving on public roads.
WARNING: Do not engage the drive shaft of the tractor (PTO) with the
engine not running!
