Agrisem Big Boss User Manual Download Page 77

Page: 77 / 90

12.5.2.3 Configuring the tramline marker

From the main screen:
1. Press button (1)

Tramline settings

to access the tramline configuration screen.

2. Press button (2) again

Tramline settings

to programme the tramlining.

3. Calculate the appropriate tramline pattern from the working widths of the seed drill and sprayer:

a. Choose whether to start working at the left or right edge of the field.

b. Divide the working width of the sprayer by the working width of the seed drill
c. Refer to the user manual of your pneumatic seed drill to select the tramline pattern according to the result of the division

calculation (even, odd or decimal).

4. Use the control wheel to navigate through the following screens and press the control wheel to confirm your choices.

Summary of Contents for Big Boss



























































































Search results

Summary of Contents for Big Boss

Reviews:

Related manuals for Big Boss

Brands by name

Popular brands

Agrisem Big Boss, User Manual

Search results

Summary of Contents for Big Boss

Reviews:

Related manuals for Big Boss

Brands by name

Popular brands