Agrisem Big Boss User Manual Download Page 18

Page: 18 / 90

Actual value obtained

from the calculation

Permissible value

according to the

user manual

Value x 2 of the permissi-

ble tyre load

3.4 Ballast calculation

The mounting or coupling of implements must not lead to the tractor's permissible gross vehicle weight, permissible

axle load and tyre specifications being exceeded.

Tractor empty weight.

Empty tractor front axle load.

Empty tractor rear axle load.

Front mass (if present).

Load transfer from the coupled machine

Distance between the centre of gravity of the front implement or front ballast and the centre of the front axle.

Tractor wheelbase.

Distance between the centre of the rear axle and the centre of the rear lower coupling point.

All weight data in (kg)

All measurement data in (m)

Calculation of the minimum ballast at the front :

Calculation of the actual front axle load :

Calculation of the actual total weight :

Calculation of the actual rear axle load :

The calculated values must not exceed the permissible values.

Mini ballast

front

Total weight

Load on front

axle

Load on rear

axle

≥

AV (min)

(total)

AV (total)

AR (total)

Summary of Contents for Big Boss



























































































Search results

Summary of Contents for Big Boss

Reviews:

Related manuals for Big Boss

Brands by name

Popular brands

Agrisem Big Boss, User Manual

Search results

Summary of Contents for Big Boss

Reviews:

Related manuals for Big Boss

Brands by name

Popular brands