Agrisem Big Boss User Manual Download Page 33

Page: 33 / 90

7 Brakes

Driving without brakes on public roads is prohibited.

7.1 Hydraulic brake

Connection

1. Connect the hydraulic line for the brake to the tractor brake line at the coupling.
2. Attach the release lever of the automatic uncoupling brake to a suitable place on the tractor.

Fix the cable in such a way that it cannot be snagged by other parts of the machine and trigger full braking when

cornering!

3. Release the parking brake. The cables must not be stretched and the wheels must be able to turn freely.

Hydraulic brake
1

Push pull socket

Loosening pump button

Automatic uncoupling brake valve

Spring pin (emergency activation)

Pressure accumulator

Cylinders

Danger of traffic accidents due to brake failure!

When commissioning or after a long period of downtime :

- Fill the pressure accumulator for emergency braking before departure.

- To do this, press the tractor's brake pedal down fully!

Summary of Contents for Big Boss



























































































Search results

Summary of Contents for Big Boss

Reviews:

Related manuals for Big Boss

Brands by name

Popular brands

Agrisem Big Boss, User Manual

Search results

Summary of Contents for Big Boss

Reviews:

Related manuals for Big Boss

Brands by name

Popular brands