Agrisem Big Boss User Manual Download Page 12

Page: 12 / 90

Take care not to damage the safety stickers when washing the machine. Change or replace any

damaged or missing stickers.

2.16 Safety stickers

2.16.1 Explanation of stickers :

Sticker

Description

Sticker

Description

380135

ETIQ01-627

Stay clear when unfolding.

Keep a safe distance

from any moving parts when

unfolding.

305021

ETIQ01-601

Stop the engine and remove the key.

Stop the engine and remove the

ignition key before carrying out any

maintenance or servicing.

305016

ETIQ01-633

Feet-crushing danger area.

Keep a safe distance from any

moving parts.

355001

ETIQ01-603

Read the user manual.

Read the user manual and safety

instructions before commissioning

and observe them during operation.

355054

ETIQ01-625

Crushing danger area.

Never work in an area where there

is a risk of crushing while parts are

still moving.

355063

ETIQ01-643

Keep a safe distance from power

lines.

Keep a safe distance from high-

voltage

power lines.

355049

ETIQ01-617

Locking device.

Apply the locking device before

any work is carried out.

305064

ETIQ01-641

Hydraulic leakage.

Follow the instructions in the user

manual for maintenance work.

355062

ETIQ01-651

Transporting on the machine.

Never carry passengers on the

machine.

355048

ETIQ01-609

Scanning area.

Stay out of the scanning area.

355035

ETIQ01-655

Rotating parts.

Never put your hands in the area

where the bolt is rotating.

380299

ETIQ01-649

Moving parts

Never climb on parts that can

rotate. Only use the equipment

intended for climbing.

Summary of Contents for Big Boss



























































































Search results

Summary of Contents for Big Boss

Reviews:

Related manuals for Big Boss

Brands by name

Popular brands

Agrisem Big Boss, User Manual

Search results

Summary of Contents for Big Boss

Reviews:

Related manuals for Big Boss

Brands by name

Popular brands