3
Devices and Operating Elements
Hydrostatic implement carrier agria 5900 Cyclone
25
Ignition lock
The ignition lock (B/12) for the electrical starter
has 3 switching positions:
O
= Engine OFF
LED lamps OFF
I
= Operating position
Whenever the unit is switched on,
the easy-control circuit is automati-
cally set to NEUTRAL
LED lamps ON
= Engine start position
Ignition key returns automatically to
operating position "
I
"
Clutch
The clutch is operated at the manual clutch lever
(B/5).
When you pull the manual clutch lever to position
"
O
":
- The traction drive stops at once and returns to
NEUTRAL position
- The PTO shaft is disengaged
- The engine continues running
•
Observe the clutch play to prevent the clutch
from slipping during work. See page 64.
Do not park the machine for too long a time
with disengaged clutch while
the engine is run-
ning
. This can damage the clutch release bear-
ing.
When the
motor is stopped
, park the machine
only with pulled hand lever (stop pawl engaged).
Failure to do so can lead to corrosion, resulting in
clutch problems.
Summary of Contents for Cyclone 5900
