manualshive.com logo in svg

Agria Cyclone 5900, Translation Of The Original Operating Instructions

Share
Download
Agria Cyclone 5900 Translation Of The Original Operating Instructions Download Page 16

2

 

Technical Data

 

 

 

16 

Hydrostatic implement carrier agria 5900 Cyclone 

Clutch:

 ..................................................................................... Dry single-disc clutch  

 

Gearbox:

 ..................................................................................................... Hydrostat 

Travel speeds:

 ............................................................................. Forward 0 - 7 km/h 

                       

Reverse 0 

– 3.6 km/h 

 

PTO shaft:

 ..................................................................................................... 805 rpm

                       

 

                       

independent of gear at an engine speed of 3600 rpm

                       

 

                       

Sense of rotation: Clockwise, looking on the PTO shaft. The same for 

forward and reverse drive. 

 

Steering:

 ......................................................................... Fully hydraulic bar steering 

                       Steering bar lockable with shutdown of the hydraulic system for hand 

bar steering 

 

Steering bar:

 ................................................................................. Height adjustment 

                       

 

Side adjustment without tools 

 

Oil for gearbox and hydrostat:

 ............................................................... Optionally: 

                       Multigrade oil: ............................... SAE 10W-40 API-SE/SF (or higher) 

                       Bio-grade hydraulic oil:............................ Synthetic Ester Base: HEES 

                       

 

Viscosity to ISO: VG 46 

                       

 

Cleanliness class min. 16/13 

– ISO 4406, e.g. 

                       ARAL: ............................................................................ Vitam EHF 46 

                       BP: ................................................................................. Biohyd SE 46 

                       ESSO:  ....................................................................................... HE 46 

                       FUCHS: ........................................................................ Plantohyd S 46 

                       PANOLIN:  ..................................................................... HLP Synth 46 

Filling volume at first filling:                        ...................................  approximately 7.0 l 

                       Oil change: ............................................................. approximately 5.0 l 

                       Oil filter: ........................................................ Screwed cartridge AW 14 

 

Drive control:

 ...................................................................... easy-control control unit 

 

Lighting:

 ....................................................................................... 2x LED, 3 W each 

  

Summary of Contents for Cyclone 5900

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands