Agria Cyclone 5900, Translation Of The Original Operating Instructions

Page: 41 / 88

4 Commissioning and Operation
Hydrostatic implement carrier agria 5900 Cyclone 41
Starting the petrol engine
1. Depending on the version, open one or both
fuel cock(s) (C/13)
2. Cold engine: Set CHOKE actuator (C/20) to
"CHOKE". Reset CHOKE when the engine is
hot
Engine
at operating temperature : Leave
CHOKE in normal operating position
3. Set speed regulating lever (B/9) to approxi-
mately 1/3 throttle
4. Insert the ignition key into the ignition lock
(B/12) and turn it clockwise to position " I " -
even if you start the engine with cable-pull
starter
- Warning lamp lights (Yamaha)
5. Start the engine from outside the hazard
zone:
- Continue turning the ignition key clockwise
to "START" position
As soon as the engine starts, release the ignition
key. The key returns automatically to position "
I ",
and the warning light goes out.
If the engine does not start, turn the ignition key
back to position "
O " before you try again to start
(start repetition lock).
- Or manual start with cable-pull starter
Tow-start is not permitted!
6. Once the engine is running, allow the engine
to warm up for a short time. Slowly move the
choke actuator back to operating position (if
actuated).
When the petrol engine is running, do not
touch or remove the ignition cable or spark
plug connector.