5
Maintenance and Repair
52
Hydrostatic implement carrier agria 5900 Cyclone
•
If the oil level is below the lower "min" mark,
fill in engine oil (see "Technical data") up to
the "max" mark.
Change engine oil
First after
8
operating hours, then after every
50
operating hours or
yearly
(whatever is first). The
engine must still be warm, but not hot -
risk of
burning!
•
Clean oil filler plug (C/2), oil drain plug and
their environment.
•
Change the oil. Dispose of the used oil
properly.
Tighten lid and oil drain plug!
Oil filing volume and quality see "Technical data".
Changing the engine oil filter
Change the oil filter (C/8) after every
100
operat-
ing hours or after each season, whatever occurs
first.
•
Prior to installing a new filter moisten the filter
seal with fresh and clean engine oil.
•
Screw on the filter manually until the seal is
in contact with the oil filter adapter. Continue
turning by another 1/3 ... 3/4 turns.
•
Start the engine and let it IDLE to check
whether there is oil leaking. Switch off the en-
gine, check the oil level and top up oil if nec-
essary.
•
Dispose of the used oil filter properly.
Summary of Contents for Cyclone 5900
