Agria Cyclone 5900, Translation Of The Original Operating Instructions

Page: 29 / 88

3 Devices and Operating Elements
Hydrostatic implement carrier agria 5900 Cyclone 29
Service and parking brake
The combined service and parking brake is used
for braking and parking the machine on hilly
grounds.
Service brake
•
Swing the eccentric lever (B/2) up and to the
rear - both driving wheels are braked.
The eccentric lever swings back to its home
position when you release it - the brake is re-
leased.
Parking brake
•
Swing the eccentric lever (B/2) up and to the
rear beyond the dead point. The eccentric
lever stops automatically - both driving
wheels are blocked.
To open the parking brake, swing the eccentric
lever back to the initial position - the brake is re-
leased.
Never drive and brake at the same time.
Before you start moving the machine, ensure
that the brake is released. Failure to do so can
cause damage due to overpressure (failure of
wheel motor).
Steering bar
Adjust the steering bar only when trac-
tion drive and PTO drive are switched off - risk
of accident!
Steering bar height adjustment
•
Press the clamping levers at both sides
until the notches are released.
•
Move the left and the right steering bar to the
required height and allow it to engage in the
corresponding notch.
•
Tighten the clamping levers .