BE-BX42S / BE-WC62G USER MANUAL
43
DRIVELINE MAINTENANCE
By following a careful service and maintenance program
for our machine, you will enjoy many years of trouble-
free operation.
The PTO driveline is designed to telescope to allow for
dimensional changes as the machine goes through its
operational range. A tubular guard encloses the driving
components and is designed to turn relative to the
driving components. The driveline should telescope
easily and the guard turn freely on the shaft at all times.
Annual disassembly, cleaning and lubrication is
recommended to ensure that all components function as
intended.
To maintain the driveline, follow this procedure:
• Remove the driveline from the machine.
• Pull driveline apart.
• Use a screwdriver to turn and lock studs on each end.
There are 2 studs per guards.
• Pull the shaft out of the plastic tubular guard.
• Use a solvent to clean the male and female portions of
the telescoping ends.
• Apply a light coat of grease to each end.
• Use a solvent to wash the grooves on each end where
the studs are located. Clean each end also.
• Apply a light coat of grease to each groove.
• Insert a shaft into its respective guard and align the
studs with the holes.
• Insert the studs through the holes and seat in the
groove.
• Turn each stud to secure guard to shaft.
• Check that each guard turns freely on the shaft.
• Assemble the driveline.
• Check that the driveline telescopes easily.
• Replace any components that are damaged or worn.
• Install the driveline on the machine.
DRIVELINE MAINTENANCE
BE-BX42S / BE-WC62G
By following a careful service and maintenance program for our machine, you will enjoy many years of
trouble-free operation.
The PTO driveline is designed to telescope to allow for dimensional changes as the machine goes through its
operational range. A tubular guard encloses the driving components and is designed to turn relative to the
driving components. The driveline should telescope easily and the guard turn freely on the shaft at all times.
Annual disassembly, cleaning and lubrication is recommended to insure that all components function as intended.
To maintain the driveline, follow this procedure:
• Remove the driveline from the machine.
• Pull driveline apart.
• Use a screwdriver to turn and lock studs on each end.
There are 2 studs per guards.
• Pull the shaft out of the plastic tubular guard.
• Use a solvent to clean the male and female portions of the
telescoping ends.
• Apply a light coat of grease to each end.
• Use a solvent to wash the grooves on each end where
the studs are located. Clean each end also.
• Apply a light coat of grease to each groove.
• Insert a shaft into its respective guard and align the studs
with the holes.
• Insert the studs through the holes and seat in the groove.
• Turn each stud to secure guard to shaft.
• Check that each guard turns freely on the shaft.
• Assemble the driveline.
• Check that the driveline telescopes easily.
• Replace any components that are damaged or worn.
• Install the driveline on the machine.
Guard Removal
Disassembled
