BE-BX42S / BE-WC62G USER MANUAL
23
MOUNTING & UNHOOKING TRACTOR
When attaching chipper, follow this procedure:
1. Clear area of bystanders, especially small
children.
2. Make sure there is enough room and clearance
to safely back up to the chipper.
3. Place tractor arms in their full sway position.
4. Back up slowly and align the lower link arms to
the pins on the machine.
Mounting without a Quick Hitch
1. Align the left lower link with the left chipper pin.
IMPORTANT - It may be necessary to add weight
to the lower lift arms to bring them to the required
height.
2. Insert the left pin through the ball and install the
retainer.
3. Align the right arm to the pin by turning the jack
screw on the arm.
4. Insert the right pin through the ball and install
the retainer. Return the jack screw to its starting
position.
5. Remove the top pin and install the top link.
Use the turnbuckle to align the top link. Insert
the pins and install the retainers. Return the
turnbuckle to its original length and lock.
6. Set the 3-point hitch in the non-sway position
(see tractor manual for details).
MOUNTING & UNHOOKING TRACTOR
BE-BX42S / BE-WC62G
When attaching chipper, follow this procedure:
1. Clear area of bystanders, especially small children.
2. Make sure there is enough room and clearance to
safely back up to the chipper.
3. Place tractor arms in their full sway position.
4. Back up slowly and align the lower link arms to
the pins on the machine.
Mounting without a Quick Hitch
1. Align the left lower link with the left chipper pin.
IMPORTANT
- It may be necessary to add
weight to the lower lift arms to bring them to
the required height.
2. Insert the left pin through the ball and install
the retainer.
3. Align the right arm to the pin by turning the
jack screw on the arm.
4. Insert the right pin through the ball and install
the retainer. Return the jack screw to its
starting position.
5. Remove the top pin and install the top link.
Use the turnbuckle to align the top link.
Insert the pins and install the retainers.
Return the turnbuckle to its original length
and lock.
6. Set the 3-point hitch in the non-sway position
(see tractor manual for details).
Fig. 14
Aligned
Pinned
Fig. 15
Fig. 16