BE-BX42S / BE-WC62G USER MANUAL
41
Weekly or Every 40 Hours
• Check sharpness of blades:
• Rotor Blade
• Stationary Blade
• Remove, sharpen or switch edge as required.
After Every 100 Hours
Grease the hydraulic feed system:
• Roller Bearings.
• Pivot Bushing.
SERVICING INTERVALS (CONT.)
BE-BX42S / BE-WC62G
Weekly or Every 40 Hours
• Check sharpness of blades:
A. Rotor Blade
B. Stationary Blade
• Remove, sharpen or switch edge as required.
After Every 100 Hours
• Grease the hydraulic feed system:
A. Roller Bearings.
B. Pivot Bushing.
Rotor
Stationary
Left Side
Right Side
Fig. 41
Fig. 42
A
A
B
B
A
A
SERVICING INTERVALS (CONT.)
BE-BX42S / BE-WC62G
Weekly or Every 40 Hours
• Check sharpness of blades:
A. Rotor Blade
B. Stationary Blade
• Remove, sharpen or switch edge as required.
After Every 100 Hours
• Grease the hydraulic feed system:
A. Roller Bearings.
B. Pivot Bushing.
Rotor
Stationary
Left Side
Right Side
Fig. 41
Fig. 42
A
A
B
B
A
A
