Take the lower part of the gearbox
122-04
and two
2 x 6mm
PB
screws. Fit the motor
121-01
in the recess
of the lower part of the gearbox as shown.
03
04
When the end of the shaft
120-01
is fitted into part
122-12
, fix it in place with a 2 x 3mm
PM
screw.
Take one of the grips,
A
, from frame
122-13
and
position it on the cog housing, over the pivot pin
122-12
. Fix in place with two 2 x 4mm
PB
screws.
01
02
Fit the first pivot pin
122-12
into the port cog housing
122-10
. Make sure that the hole in the pin faces
upwards (arrow).
Grip the end of shaft
120-01
with the flattened
side of the end facing upwards (red arrow). Fit it into
the open end of the pivot pin
122-12
(yellow arrow).
Fix the motor
121-01
in place in the lower part
of the gearbox
122-04
using the two 2 x 6mm
PB
screws, as shown.
09
10
121-01
122-04
121-01
122-10
122-12
120-01
120-01
122-12
PB
2 x 6
122-04
122-12
A
122-10
02
. FITTING THE COG SHAFTS
PM
2 x 3
PB
2 x 4
PB
2 x 6
22
21
AGORA
MODELS
22
AGORA
MODELS
