64-01
64-01
119-01
119-01
C-6, C-7,
C-8, C-9
C-1
C-3
C-2
C-10
C-8
C-9
C-5, C-6,
C-7
PB
07
08
05
06
Run the cables labelled
C-6
,
C-7
,
C-8
and
C-9
through the same bracket on the upper deck section
64-01
, in the same direction as
C-5
, as shown.
Press the cables labelled
C-1
,
C-2
and
C-3
into the
slots in the rib on the underside of deck section
64-01
, as shown. The slot on the right in this photo
remains empty.
Press the cables labelled
C-8
,
C-9
and
C-10
into the
three slots in the bar on the other side of the deck,
as shown.
Gather together the cables marked
C-5
,
C-6
and
C-7
and run them towards the rear of the deck (to
the right in this photo) so that the connectors are
clear of where the circuit board
119-01
will be
attached (see next two steps).
Take the circuit board
119-01
and position it on the
upper deck in the orientation shown. Ports 11 and 12
are on the left in this photo (circled in white).
Fix the circuit board
119-01
in place using four
2 x 6mm
PB
screws.
03
04
PB
11
11
AGORA
MODELS
12
AGORA
MODELS
