09
05
07
06
08
10
Fit the tension spring
128-06
on to the clutch shaft
128-10
. Turn the assembly over and fit the gun barrels
into the cradle
128-09
in the direction indicated. The
clutch shaft
128-10
fits into the central hole in the
cradle. Push the barrel connector backwards and
forwards a few times to ensure that it moves freely.
Place the upper part of the motor mounting
128-07
on the base plate of the barrel cradle
128-09
, as
shown. You will need two
PB
screws.
Turn the assembly over and fix the upper part of the
motor mounting
128-07
to the base plate
128-09
using the two
PB
screws.
Take the motor
128-01
and the cable label
128-18
.
Remove the label from its backing and wrap it around
the end of the cable, as shown.
Fit the motor
128-01
into the motor mounting
128-07
. Make sure that the cables on the circuit board
of the motor
128-01
are in the direction shown
(arrow).
Fit the lower part of the motor mounting
128-11
on
the upper part
128-07
. Fix the parts together using
two
PB
screws.
128-06
128-07
128-18
128-01
128-07
128-10
128-09
PB
128-09
128-07
128-09
PB
128-01
128-07
128-11
PB
PB
54
53
AGORA
MODELS
54
AGORA
MODELS
