W2642A Quick Start Guide
Rev. AP12
Page 17
Figure 3-4 – Ethernet/IP connection to W2642A via direct connection
To set the generator’s IP address:
5. Press the Tools key. The Tools menu appears on the generator’s display as shown below.
6. Choose the System item by pressing the adjacent soft key. The System menu appears on the generator’s
display as shown below.
7. Choose the Network item by pressing the adjacent soft key. The generator’s IP address and subnet mask
appear on the generator’s display as shown below.
8. Press the Settings key. The Network Connection screen appears on the generator’s display as shown below.
If the IP Address configuration option is not visible, press the soft key adjacent to the arrow symbol by
SubnetMask until IP Address appears.
5. Change the IP address as follows:
Summary of Contents for W2642A
