36
U1401B User’s and Service Guide
2
Calibrator Output Operations
2
Press
OUTPUT
to save the settings.
Autoramp output
To set the
autoramp
output:
1
Turn the rotary switch to any one of the
or
positions.
2
Press
SHIFT
to access the shifted operations of the keypad.
The
annunciator will appear on the display.
3
Follow one of the instructions below:
•
For voltage output, press
MODE
to cycle through ±1.5 V,
±15 V,
±1.5 V,
±15 V,
±1.5 V, and
±15 V output modes. Select either of the two
(
autoramp
) output modes, depending on the
voltage range you require.
•
For current output, press
MODE
to cycle through
±25 mA,
±25 mA, and
±25 mA output
modes. Select the
output mode.
Figure 2-3
Defining the autoscan output
16 memory
locations
0 to 99 sec
time
interval
Output amplitude
Summary of Contents for U1401B
