Agilent Technologies U1401B, User'S Manual And Service Manual

Page: 19 / 181

U1401B User’s and Service Guide XIX
Figures
Figures
Figure 1-1. The slide switch 5
Figure 1-2. The front panel 7
Figure 1-3. The rotary switch 8
Figure 1-4. Keypad functions 9
Figure 1-5. Keypad shifted functions 10
Figure 1-6. Full display 13
Figure 1-7. Terminals 17
Figure 1-8. The rear panel 19
Figure 1-9. IR-USB cable 24
Figure 1-10. IR-USB cable connection 25
Figure 1-11. IR-USB cable 25
Figure 2-1. Selecting autoscan output mode 34
Figure 2-2. Example of a typical autoscan output 34
Figure 2-3. Defining the autoscan output 36
Figure 2-4. Selecting autoramp output mode 38
Figure 2-5. Ramp output 38
Figure 2-6. Defining the autoramp output 40
Figure 2-7. Parameter selection for square wave output 43
Figure 3-1. DC voltage measurement 47
Figure 3-2. AC voltage measurement 48
Figure 3-3. DC current (mA) measurement 49
Figure 3-4. Surface temperature measurement 53
Figure 3-5. Resistance measurement 55
Figure 3-6. Enabling and disabling the continuity test 55
Figure 3-7. Dynamic recording mode 59
Figure 3-8. Relative (zero) mode 60
Figure 3-9. Data hold mode 61
Figure 3-10. 1 ms peak hold mode 64
Figure 4-1. Entering the setup mode 66
Figure 4-2. Setting the data hold or refresh hold mode 70
Figure 4-3. Setting the temperature unit 72