42
L4411A Getting Started Guide
2
L4411A Software Installation and Configuration
As instruments are added, they appear in the Agilent Connection Expert
Explorer pane as shown in Figure 2-7. Selecting the instrument in the
Explorer pane displays its properties in the Properties pane.
Figure 2-7. Configured Instruments added to LAN Network.
About IP Addresses and Host names
Dynamic Host Configuration Protocol
(DHCP) and Automatic IP are enabled on the L4411A when shipped from Agi-
lent. This allows the instrument to automatically obtain an address on the net-
work. If there is a DHCP server on the network, the server will assign the
address to the instrument.
If there is not a DHCP server on the network, the L4411A will automatically
determine the address to use. The address will be in the range 169.254.1.1 to
169.254.255.255. If available, the instrument will try to acquire its default set-
ting of 169.254.4.10.
configured instruments
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
