50
L4411A Getting Started Guide
2
L4411A Software Installation and Configuration
Figure 2-13. Updating Configuration Expert after Changing the GPIB
Address.
The interface is then refreshed with the new GPIB address.
USB Configuration
The L4411A is a high-speed USB 2.0 device. Connection to the instrument is
through the Type B USB connector located on the instrument rear panel.
The first time the L4411A is connected to the PC via the USB cable, a “hard-
ware wizard” utility within the PC may start and prompt you for an installa-
tion CD that came with the product. There is no installation software for the
USB interface other than the libraries on the Agilent Automation-Ready CD
that ships with the L4411A. Continue through the “wizard” application
without
installing the Automation-Ready CD.
highlight the instrument,
select, and change the
address
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
