18
L4411A Getting Started Guide
1
Preparation for Use
Table 1-1. L4411A Display Sequences.
Sequence
Display
Description
Power-On
Agilent L4411A
f.ff - b.bb - gg - rr
f.ff: installed instrument firmware revision
b.bb: boot kernal firmware revision - recovery
revision if firmware update utility fails or is interrupted
gg: FPGA revision
rr: PC board revision
MAC ADDRESS
0030D3xxxxxx
Media Access Control (MAC) address - is the physical (hard-
ware) address of the L4411A LAN port. 0030D3 is an Agilent
Organizationally Unique Identifier (OUI).
<reading w/units>
initializing lan
The L4411A is waiting for the LAN connection to be estab-
lished. Power-on sequence is complete if using the GPIB or
USB interface only.
<reading w/units>
xxx.xxx.xx.xxx
Power-on sequence is complete. The LAN connection is
established and the L4411A IP address is displayed.
Identifying
<reading w/units>
identifying
Identifies the instrument on the LAN network by displaying
“identifying”. Activated from the L4411A Web interface (LAN
connection only):
ON: Turn On Front Panel Identification Indicator
OFF: Turn Off Front Panel Identification Indicator
Reset
<reading w/units>
resetting lan
no lan address
initializing lan
Momentarily displayed after pressing the L4411A rear panel
‘LAN Reset’ button.
LAN Cable
Disconnected
<reading w/units>
no lan connect
LAN cable disconnected during operation.
Firmware
Update
‘progress bar’
UPDATING ROM
REBOOTING
UPDATE COMPLETE
Occurs during a L4411A firmware update using the
Agilent ‘Firmware Update Utility’.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
