L4411A Getting Started Guide
21
Preparation for Use
1
Turn On Front Panel Identification Indicator
When ‘on’, the L4411A will display “
identifying
” until the following is selected:
Turn Off Front Panel Identification Indicator
SCPI Programming
To send SCPI commands to the L4411A from the Web
interface, select the “Browser Web Control” tab on the welcome page (Figure
1-3). Once the ‘web control page’ is displayed, select “
Allow Full Control
” and
close the the “Monitor DMM” and “Control DMM” windows (Figure 1-4).
Figure 1-4. The L4411A Browser Web Control Page.
Open the “SCPI Command interface” window by clicking the “Commands” but-
ton. The command interface window is shown in Figure 1-5.
select
close
close
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
