Agilent Technologies Heartstream FR2, User Manual

Page: 35 / 87

Troubleshooting Guide
4-12 Maintaining, Testing, and Troubleshooting Your H EARTSTREAM FR2
NOTE: After completing emergency use of the FR2, if you are unable to clear the
problem as described in this Troubleshooting section, and the Status Indicator does
not show the flashing black hourglass, contact Agilent for technical support.
Status Indicator Details
None of the above
The FR2 may not be usable.
1. Remove pads, if connected, and remove and reinstall the battery.
2. Run the battery insertion selftest. If the selftest passes and the flashing black
hourglass appears and/or SELFTEST PASSED is displayed, turn off the device
by pressing the On/Off button. If the selftest fails, repeat with a spare battery, if
available.
3. Turn on the device by pressing the On/Off button.
4. Follow the voice prompts.
In this condition, the FR2 may not perform to its specifications. However, if voice
and screen prompts are present, it is likely that the device is usable despite the
lack of a Status Indicator.
Therefore, in an emergency incident when there is no other defibrillator avail-
able, it is recommended that you continue to use the FR2 .
STATUS INDICATOR
RECOMMENDED ACTION DURING EMERGENCY
STATUS
INDICATOR
OTHER
SIGNAL
POSSIBLE CAUSE
RECOMMENDED ACTION
Flashing
black
hourglass Audio signal:
chirping
The Training & Administration Pack
is being used in the TRAINING
function and more than 30 minutes
have passed without a button press. • To continue using the Training &
Administration Pack, press any
button.
• To return the FR2 to standby mode,
remove the Pack and install a battery.