Agilent Technologies Heartstream FR2, User Manual, Page: 36 / 87

Troubleshooting Guide
M3860A and M3861A H EARTSTREAM FR2 Defibrillator 4-13
4
Flashing
red
X
Audio signal:
chirping
• Battery power is low.
• The FR2 has been stored outside
the recommended temperature
range.
• An error has been detected as
part of the selftest.
• The FR2 has been unable to
perform its daily selftests.
• Remove and reinstall the battery and
run a battery insertion selftest. A
screen prompt will tell you if the FR2
has been stored outside the
recommended temperature range. See
Appendix B for recommended range.
• Remove and reinstall the battery and
perform the battery insertion selftest.
If it fails, install a new battery and
repeat the test. If it fails again, contact
Agilent Technologies for technical
support.
• Make sure defibrillation pads are not
attached to the FR2.
Solid red X None • The Training & Administration
Pack is being used in the
administration function; solid red
X
is normal.
• The battery is missing or
completely depleted.
• Remove the Training &
Administration Pack and install the
battery.
• Remove and reinstall the battery and
perform the battery insertion selftest.
If it fails, install a
new battery and
repeat the test. If it fails again, contact
Agilent Technologies for technical
support.
STATUS
INDICATOR
OTHER
SIGNAL
POSSIBLE CAUSE
RECOMMENDED ACTION