Agilent Technologies Heartstream FR2, User Manual

Page: 22 / 87

Step 3: Shock Delivery
M3860A and M3861A H EARTSTREAM FR2 Defibrillator 3-5
3
WARNING: Do not place the defibrillation pads on the patient’s chest and back
(anterior-posterior). The algorithm used by the H
EARTSTREAM
FR2 has not been validated with
anterior-posterior pads placement.
WARNING: Do not let the defibrillation pads touch each other or other ECG electrodes, lead
wires, dressings, transdermal patches, etc. Such contact can cause electrical arcing and
patient skin burns during defibrillation and may divert defibrillating current away from the
heart.
WARNING: During defibrillation, air pockets between the skin and defibrillation pads can cause
patient skin burns. To help prevent air pockets, make sure defibrillation pads completely adhere
to the skin. Do not use dried-out defibrillation pads.
WARNING: Handling or transporting the patient during heart rhythm analysis can cause an
incorrect or delayed diagnosis. If the H
EARTSTREAM
FR2 gives a SHOCK ADVISED prompt, keep
the patient as still as possible for at least 15 seconds so the H EARTSTREAM FR2 can reconfirm the
rhythm analysis before a shock is delivered.
WARNING:
CPR rates significantly above the American Heart Association guidelines of 100
compressions per minute can cause incorrect or delayed analysis by the H
EARTSTREAM
FR2.
WARNING:
Defibrillation current can cause operator or bystander injury. Do not touch the
patient during defibrillation. Do not allow the defibrillation pads to touch any metal surfaces.
Disconnect the pads connector from the H
EARTSTREAM FR2 before using any other defibrillator.
CAUTION
: : : :
Aggressive handling of the pads in storage or prior to use can damage the pads. Discard the
defibrillation pads if they become damaged.