©
2000 Agilent Technologies
Automatic Barcode Reader
4
Figure 2
Microscan 610 and ADP-232
2
Power on the BCR ADP-232.
The Scan Head should generate a
continuous series of raster scan lines. Position the scan head towards the
standard bar code label at a distance of about 2.0" (50mm) and verify that
the raster scans across the length of the bar code label. Also check the
power status “green” indicator light is lit. If the code can be read from the
default settings, the "red" good read indicator light will also be lit. In
addition, the BCR read head will beep continuously while reading the bar
code label. Reference
Figure 3