Using Load Cards and Loads
5
E6198B Switch/Load Unit User Manual
5-5
Using the Load Cards
This section describes how to configure and use the load cards.
Load Card Type and Configuration ID
Each load card type is assigned a card type number as follows:
Agilent E6175A 8-Channel:
Card Type is 1
Agilent E6176A 16-Channel:
Card Type is 2
Agilent E6177A 24-Channel:
Card Type is 3
Agilent U7177A 24-Channel:
Card Type is 24
Agilent U7177A 8-Channel Heavy Duty:
Card Type is 4
Agilent N9378A 24-Channel Low Resistance:
Card Type is 5
Agilent N9379A 48-Channel High Density:
Card Type is 6
Agilent N9377A 16-Channel Dual Load:
Card Type is 7
Except for the N9378A and N9379A, each load card is equipped
with a 10-pin connector to allow assignment of a unique binary
code ID number to each card. This is useful for verifying a
particular configuration of the cards in the SLU. Refer to
Figure 5-2
.
•
Pin 1 is used for bit 8 on the N9377A card only
•
Pins 2-5 correspond to bits 0-3, respectively
•
Pins 7-10 correspond to bits 4-7, respectively
•
See
“Connecting Loads"
for more information on addressing
loads on the N9378A load card.
Figure 5-2
Pin Assignments on the Card Configuration Jack
Summary of Contents for E6198B
Page 10: ...x E6198B Switch Load Unit User Manual THIS PAGE IS INTENTIONALLY LEFT BLANK...
Page 198: ...7 10 E6198B Switch Load Unit User Manual 7 Using the Custom Card Figure 7 8 E8794A Schematic...
Page 313: ...G 1 Agilent TS 5000 E6198B Switch Load Unit User Manual Agilent Technologies Glossary Of Terms...
