502
C
Communication with External Instruments Using 24-bit I/O Port
Timing Chart and Pulse Width
Figure C-5 shows a timing chart of the pulse input to INPUT1, /OUTPUT1 signal output
and /OUTPUT2 signal output.
Figure C-5
Timing chart of /INPUT1 and /OUTPUT1, /OUTPUT2
Figure C-6 shows a timing chart of limit test result output (/PASS FAIL signal output) and
/PASS FAIL write strobe signal output.
Figure C-6
Timing chart of data output and write strobe signal
Table C-5
Values of T1 through T2 in Figure C-5 (typical)
Minimum value
T1
Pulse width of /INPUT1
1
μ
s
T2
Response time of /OUTPUT1, /OUTPUT2
0.5
μ
s
Table C-6
Values of T1 through T2 in Figure C-6 (typical)
T1
Response time of /PASS FAIL write strobe
1
μ
s
T2
Pulse width of /PASS FAIL write strobe
1
μ
s
Summary of Contents for E5052A
