7
321
SCPI Command Reference
:SENSe:TR[1-1]:NARRow:FREQuency:RANGe
7. SCPI Command
Re
fe
re
nc
e
off, the LO frequency within the frequency offset, and the conversion mode used in
the frequency offset)
When the downconverter is turned on and the RF input is set to 'E5052A
Direct'(Allowable setting range varies depending on whether the frequency offset is
on or off, the LO frequency within the frequency offset, and the conversion mode
used in the frequency offset)
When the downconverter is turne on and the RF input is set to
'Downconverter'(Allowable setting range varies depending on the target frequency
and frequency range of the narrow band mode)
Equivalent key
TR Menu -> Setup -> Phase Reference
TR Menu -> Marker To -> Marker -> Phase Reference
:SENSe:TR[1-1]:NARRow:FREQuency:RANGe
Syntax
:SENSe:TR[1-1]:NARRow:FREQuency:RANGe {R25_6|R1_6|R0_2}
:SENSe:TR[1-1]:NARRow:FREQuency:RANGe?
Description
Sets/Reads frequency transient range in narrowband mode
<Numeric>
Range
9.2M to 117.0128G
Preset value
1G
Unit
Hz
Resolution
-
<Description>
Range
9.2M to 113.0128G
Preset value
3G
Unit
Hz
Resolution
100m
<Description>
Range
3G to 26.5128G
Preset value
3G
Unit
Hz
Resolution
100m
Summary of Contents for E5052A
